HOW TO FIGHT CANON PRINTER ERROR 6C10
If we talk about Canon printers then, this printers contain an internal counter that keeps track of the number of pages that have been printed and how many times a clean-up has been done, and so on. These counters are used to determine the amount of waste ink that could be collected at the printer base. If the canon printer believes that the waste ink tank is full, the printer does not print and sends an error message “error 6c10 canon printer.”
Fixed error 6c10 without any problems
Canon printers have an affinity to incorrectly determine the level of the waste tank. So, you can usually print more, just by resetting your internal counter. You will learn just that in this step-by-step article on solve 6c10 canon printer error.
Steps to solve canon printer error message 6c10
First of all, we ‘re going to try to clean the foam that collects waste ink. This should, hopefully, make the error clear.
Step 1: Remove the lid of the printer and allow the cartridge carrier inside the printer to center itself. When the cartridge carrier is centered, you will see a row of white rollers on the right side behind the carrier.
Step 2: Clean up the plastic. At the end of the rollers, you’ll find a small piece of plastic that’s clear and sticks out. Take a small piece of soft cloth or a paper towel to wipe the ink from the plastic. After cleaning the plastic, make sure you clean the ink pad as well.
Step 3: Clean your foam pad. From the plastic piece to the front, you’ll find a small square object that looks like a foam pad. This is where the excess ink is collected by the printer. Use a clean piece of paper towel and press it onto the foam pad. Keep the pad clean until the paper towel does not collect any more ink from the pad.
Step 4: Restart your printer. After cleaning it all, put it back in its original position, and plug the printer in again. This is supposed to fix your problem. If not, we ‘re going to need to restart the ink absorber counter.
To reset the absorber ink counter, perform the following steps:
Step 1: Turn off your printer.
Step 2: Now you have to, press and hold down the Resume button.
Step 3: Next, press and hold down the Power button at the same time. This is going to make the green LED light up.
Step 4: Hold the power button, release the restart button.
Step 5: Press the resume button twice and release the two buttons together.
Step 6: Press the Resume button four times and then press the Power button immediately.
The ink absorber counter on the printer should be reset to the above sequence of moves. After this step has been completed, unplug the device and plug it in again.
If user have cleaned the foam collector as well as reset the ink absorber counter, then their question on how to fix canon printer error 6c10 has been answered successfully. If this is not the case, you will need to contact the customer support team to help you fix your problem.